Point locations of access to the shoreline, with descriptions of the construction type, nearshore location, and size.
This data set was developed to measure the shoreline accessibility, and determine the impacts that may occur due to such activty in the nearshore environment
This data was developed as part of the field inventory for the Kitsap County Nearshore Inventory Program for East Kitsap during the summer of 2007.
ground condition
Determination of fitness for use lies with the user, as does the responsiblity for understanding the accuracy and limitations of this data. There is no guarantee or warranty to its accuracy as to labeling, placement or location of any geographic features present within this data. These data are intended for informational purposes only, and should not be considered authoritative for engineering, navigational, surveying, and other site-specific uses. Kitsap County assumes no legal liability arising from the use of this data in a manner not consistent with the original intent. In no event shall Kitsap County be liable for damages of any kind, including loss of anticipated benefits arising from the use of this data. No one is permitted to sell this information except in accordance with a written agreement with Kitsap County.
614 Division St ms-36
Kitsap County Nearshore Inventory Program
Field data collection was accomplished with a Trimble GeoXM field data collector. This model is stated to provide 1 to 3 meter accuracy when the PDOP (Position dilution of precision) value is below 6, with a minimum of 4 satellites in view, above 15 degrees of the horizon. Varying by feature type, 4% - 13% of the data collected fell outside of this PDOP range. During data collection, a wide variety of conditions are encountered that can block the signal for short periods, or reduce the number of satellites found. These conditions include steep slopes along the shore, heavy forested shorelines, and tall urban development.
Inventory data was collected in the field between May 17, 2007 and August 27, 2007. Project area consisted of East Kitsap County shorelines, from Burley Lagoon in the South, to FoulWeather Bluff in the north. Data collection was accomplished with a Trimble GeoXM GPS data collector, and a field crew of two. Daily downloads of collected data occurred using Trimble's Pathfinder Office 3.10 software
614 Division St MS-36
Post-Processed all files using Trimble's Pathfinder Office 3.10 software's differential corrrection tools.
Merged outputs from daily data collections into an individual feature class
Exported merged shapefiles to geodatabase
Metadata Imported
614 Division St MS-36
Internal feature number.
ESRI
Feature geometry.
ESRI
Meterial feature is made of
Linear direction in relation to the shoreline
Placement in relation to the armoring
Height of bank exceeded 10 feet
Represented by number of steps
Physical state of repair
Doubles as stairs and as a boat launch
Position dilution of precision
Date attribute was recorded
Pacific Time Zone
614 Division St
ms-36