FGDC and ESRI Metadata:
Metadata elements shown with blue text are defined in the
Federal Geographic Data Committee's (FGDC)
Content Standard for Digital Geospatial Metadata (CSDGM).
Elements shown with green
text are defined in the
ESRI Profile of the CSDGM.
Elements shown with a green asterisk (*)
will be automatically updated by ArcCatalog.
ArcCatalog adds hints indicating which FGDC elements are mandatory;
these are shown with gray text.
-
- Citation:
-
- Citation information:
-
-
Originators:
Kitsap County GIS
- Title:
- Quaternary Geology and Stratigraphy of Kitsap County
- *File or table name:
GIS.ENVIRO_STABILITY_POLY
-
Publication date:
March 2004
- *Geospatial data presentation form:
vector digital data
- *Online linkage:
Server=kclora; Service=esri_sde; User=gis; Version=SDE.DEFAULT
- Description:
-
- Abstract:
- "Quaternary Geology and Stratigraphy of Kitsap County", - Jerald Deeter 1979 thesis (WWU).
The original slope stability coverage was obtained by digitizing the "Slope Stability Map of Kitsap County" from the Deeter 1979 thesis. This work was performed by Kitsap County GIS. Accuracy and precision standards used for digitizing are unknown. Spatial accuracy is fairly good at small scales, however, accuracy diminishes as the scale increases. Horizontal displacement is quite noticeable along shorelines when comparison of physical features such as estuaries and peninsulas are observed along side imagery. Displacement ranges between 60 to 200 feet at different locations.
Limitations of this data set are multiplied due to the spatial accuracy and constrains of the originating data and the digitizing process. This data set is useful for general area characteristics at medium to small scales (on large geographical areas), but not for characteristic determinations at large scales (on small and site specific geographical areas).
**This data cannot and may not be used for or relied upon for site-specific evaluations, nor as a substitute for a field survey.
- NOTE: The original Deeter work contained an "Io" stability value, which was a subcategory of Intermediate slopes. This subcategory was created and used by Deeter for those Intermediate slopes that were in excess of 30 percent grade which, at the time, had applicable on-site sewage disposal system restrictions per WAC 248-96 (Deeter). As these regulations no longer apply, the "Io" subcategory was removed, leaving all Intermediate slopes under the Intermediate (I) stability value. -
- Purpose:
- Analysis of large areas to determine suitability for specific uses, or to plan the management needs for those uses or other uses, and for general area characteristics at medium to small scales (on large geographical areas), but not for characteristic determinations at large scales (on small and site specific geographical areas).
- *Language of dataset:
en
- Time period of content:
-
- Time period information:
-
- Single date/time:
-
-
Calendar date:
March 2004
- Currentness reference:
- publication date
- Status:
-
-
Progress:
Complete
-
Maintenance and update frequency:
As needed
- Spatial domain:
-
- Bounding coordinates:
-
- *West bounding coordinate:
236.959576
- *East bounding coordinate:
237.540286
- *North bounding coordinate:
47.942893
- *South bounding coordinate:
47.395408
- Local bounding coordinates:
-
- *Left bounding coordinate:
1099455.000000
- *Right bounding coordinate:
1237688.125000
- *Top bounding coordinate:
348238.313000
- *Bottom bounding coordinate:
151911.719000
- Keywords:
-
- Theme:
-
-
Theme keywords:
soil stability
- Point of contact:
-
- Contact information:
-
- Contact organization primary:
-
-
Contact organization:
Kitsap County, WA
- Contact position:
GIS Manager
- Contact address:
-
-
Address type:
mailing address
- Address:
- 614 Division St, MS-21
-
City:
Port Orchard
-
State or province:
WA
-
Postal code:
98366
- Country:
United States
-
Contact voice telephone:
(360) 337-4782
- Contact TDD/TTY telephone:
(800) 816-2782
- Contact facsimile telephone:
(360) 337-4555
- Contact electronic mail address:
gis@co.kitsap.wa.us
- Hours of service:
8:00 AM - 4:30 PM (PST), Mon - Fri
- *Native dataset format:
SDE Feature Class
- *Native data set environment:
- Microsoft Windows 2000 Version 5.1 (Build 2600) Service Pack 1; ESRI ArcCatalog 8.3.0.800
Back to Top
-
- Lineage:
-
Back to Top
-
- *Direct spatial reference method:
Vector
- Point and vector object information:
-
- SDTS terms description:
-
- *Name:
GIS.ENVIRO_STABILITY_POLY
- *SDTS point and vector object type:
G-polygon
- *Point and vector object count:
1277
- ESRI terms description:
-
- *Name:
GIS.ENVIRO_STABILITY_POLY
- *ESRI feature type:
Simple
- *ESRI feature geometry:
Polygon
- *ESRI topology:
FALSE
- *ESRI feature count:
1277
- *Spatial index:
TRUE
- *Linear referencing:
FALSE
Back to Top
-
- Horizontal coordinate system definition:
-
- Coordinate system name:
-
- *Projected coordinate system name:
NAD_1983_StatePlane_Washington_North_FIPS_4601_Feet
- *Geographic coordinate system name:
GCS_North_American_1983
- Planar:
-
- Grid coordinate system:
-
- *Grid coordinate system name:
State Plane Coordinate System 1983
- State Plane Coordinate System:
-
- *SPCS zone identifier:
4601
- Lambert conformal conic:
- *Standard parallel:
47.500000
- *Standard parallel:
48.733333
- *Longitude of central meridian:
-120.833333
- *Latitude of projection origin:
47.000000
- *False easting:
1640416.666667
- *False northing:
0.000000
- Planar coordinate information:
-
- *Planar coordinate encoding method:
coordinate pair
- Coordinate representation:
-
- *Abscissa resolution:
0.001000
- *Ordinate resolution:
0.001000
- *Planar distance units:
survey feet
- Geodetic model:
-
- *Horizontal datum name:
North American Datum of 1983
- *Ellipsoid name:
Geodetic Reference System 80
- *Semi-major axis:
6378137.000000
- *Denominator of flattening ratio:
298.257222
- Vertical coordinate system definition:
-
- Altitude system definition:
-
- *Altitude resolution:
1.000000
- *Altitude encoding method:
Explicit elevation coordinate included with horizontal coordinates
Back to Top
-
- Detailed description:
-
- *Name:
GIS.ENVIRO_STABILITY_POLY
- Entity type:
-
- Entity type label:
Quaternary Geology and Stratigraphy of Kitsap County
- *Entity type type:
Feature Class
- *Entity type count:
1277
- Attribute:
-
- *Attribute label:
FID
- *Attribute alias:
FID
- *Attribute definition:
- Internal feature number.
- *Attribute definition source:
- ESRI
- *Attribute type:
OID
- *Attribute width:
4
- *Attribute precision:
10
- *Attribute scale:
0
- Attribute domain values:
-
- *Unrepresentable domain:
- Sequential unique whole numbers that are automatically generated.
- Attribute:
-
- *Attribute label:
SHAPE
- *Attribute alias:
SHAPE
- *Attribute definition:
- Feature geometry.
- *Attribute definition source:
- ESRI
- *Attribute type:
Geometry
- *Attribute width:
4
- *Attribute precision:
0
- *Attribute scale:
0
- Attribute domain values:
-
- *Unrepresentable domain:
- Coordinates defining the features.
- Attribute:
-
- *Attribute label:
STABILITY
- *Attribute alias:
STABILITY
- Attribute definition:
- Slope Stability
- Attribute definition source:
- Coastal Zone Atlas
- *Attribute type:
String
- *Attribute width:
8
- *Attribute precision:
0
- *Attribute scale:
0
- Attribute domain values:
-
- Enumerated domain:
-
- Enumerated domain value:
S
- Enumerated domain value definition:
- Stable - Slopes are generally less than 15 percent except in local ares of low water table or competent bedrock. It includes rolling uplands and lowlands underlain by very stable material such as weathered till and deposits such as peat, which although inherently weak, have no significant slope.
- Enumerated domain value definition source:
- Jerald D. Deeter "Quaternary Geology and Stratigraphy of Kitsap County" Thesis, 1979
- Enumerated domain:
-
- Enumerated domain value:
I
- Enumerated domain value definition:
- Intermediate - Slopes are generally between 15 and 30 percent and in some areas in excess of 30 percent up to 70 percent slopes. This category includes slopes without known failures in sand, gravel, till, and thin soil over bedrock. In the vecinity of Green and Gold Mountains, talus from rock falls is found at the base of slopes greater than 30 percent.
- Enumerated domain value definition source:
- Jerald D. Deeter "Quaternary Geology and Stratigraphy of Kitsap County" Thesis, 1979
- Enumerated domain:
-
- Enumerated domain value:
U
- Enumerated domain value definition:
- Unstable (U) - Slopes considered unstable due to geologic, ground water, slope, or erosional factors. This category includes areas of landslides and talus too small or obscure to be individually mapped.
- Enumerated domain value definition source:
- Jerald D. Deeter "Quaternary Geology and Stratigraphy of Kitsap County" Thesis, 1979
- Enumerated domain:
-
- Enumerated domain value:
Urs
- Enumerated domain value definition:
- Unstable (Urs) - The symbol 'Urs' is used for recent or historically active landslides. These are also slopes considered unstable due to geologic, ground water, slope, or erosional factors. This category includes areas of landslides and talus too small or obscure to be individually mapped and recent or historically active landslides.
- Enumerated domain value definition source:
- Jerald D. Deeter "Quaternary Geology and Stratigraphy of Kitsap County" Thesis, 1979
- Enumerated domain:
-
- Enumerated domain value:
Uos
- Enumerated domain value definition:
- Unstable (Uos) - The symbol 'Uos' is used for old, post-glacial but prehistoric landslides. These are also slopes considered unstable due to geologic, ground water, slope, or erosional factors. This category includes areas of landslides and talus too small or obscure to be individually mapped and old, post-glacial but prehistoric landslides.
- Enumerated domain value definition source:
- Jerald D. Deeter "Quaternary Geology and Stratigraphy of Kitsap County" Thesis, 1979
- Enumerated domain:
-
- Enumerated domain value:
M
- Enumerated domain value definition:
- Modified slopes - Slopes highly modified by man. This includes areas of significant excavation and filling. Slope response to a combination of natural processes and man's activities are unpredictable except by detailed on-site investigation.
- Enumerated domain value definition source:
- Jerald D. Deeter "Quaternary Geology and Stratigraphy of Kitsap County" Thesis, 1979
- Enumerated domain:
-
- Enumerated domain value:
W
- Enumerated domain value definition:
- Water - Areas of water or estuaries.
- Enumerated domain value definition source:
- Jerald D. Deeter "Quaternary Geology and Stratigraphy of Kitsap County" Thesis, 1979
- Attribute:
-
- *Attribute label:
SHAPE_AREA
- *Attribute alias:
SHAPE_AREA
- *Attribute definition:
- Area of feature in internal units squared.
- *Attribute definition source:
- ESRI
- *Attribute type:
Double
- *Attribute width:
0
- *Attribute precision:
0
- *Attribute scale:
0
- Attribute domain values:
-
- *Unrepresentable domain:
- Positive real numbers that are automatically generated.
- Attribute:
-
- *Attribute label:
SHAPE_LEN
- *Attribute alias:
SHAPE_LEN
- *Attribute definition:
- Length of feature in internal units.
- *Attribute definition source:
- ESRI
- *Attribute type:
Double
- *Attribute width:
0
- *Attribute precision:
0
- *Attribute scale:
0
- Attribute domain values:
-
- *Unrepresentable domain:
- Positive real numbers that are automatically generated.
Back to Top
-
- Distributor:
-
- Contact information:
-
- Contact organization primary:
-
-
Contact organization:
Kitsap County, WA
- Contact position:
GIS Manager
- Contact address:
-
-
Address type:
mailing address
- Address:
- 614 Division St, MS-21
-
City:
Port Orchard
-
State or province:
WA
-
Postal code:
98366
- Country:
United States
-
Contact voice telephone:
(360) 337-4782
- Contact TDD/TTY telephone:
(800) 816-2782
- Contact facsimile telephone:
(360) 337-4555
- Contact electronic mail address:
gis@co.kitsap.wa.us
- Hours of service:
8:00 AM - 4:30 PM (PST), Mon - Fri
- Resource description:
KCLORA - SUN SOLARIS PLATFORM.
ORACLE 9i LISP INSTANCE.
ESRI SDE SOFTWARE.
- Standard order process:
-
- Digital form:
-
- Digital transfer information:
-
- Format name:
SHP
- Format specification:
- ESRI Shape File
- File decompression technique:
zip
- Transfer size:
10.207
- Digital transfer option:
-
- Online option:
-
- Computer contact information:
-
- Network address:
-
- Network resource name:
ftp://kcwppub3.co.kitsap.wa.us/gis/datacd/arcview/layers/enviro/stability.zip
- Custom order process:
- Please refer to http://www.kitsapgov.com/gis/metadata/
- Technical prerequisites:
- Exported data is Shape File format.
Back to Top
-
- *Metadata date:
20040622
- *Language of metadata:
en
- Metadata contact:
-
- Contact information:
-
- Contact organization primary:
-
-
Contact organization:
Kitsap County, WA
- Contact position:
GIS Manager
- Contact address:
-
-
Address type:
mailing address
- Address:
- 614 Division St, MS-21
-
City:
Port Orchard
-
State or province:
WA
-
Postal code:
98366
- Country:
United States
-
Contact voice telephone:
(360) 337-4782
- Contact TDD/TTY telephone:
(800) 816-2782
- Contact facsimile telephone:
(360) 337-4555
- Contact electronic mail address:
gis@co.kitsap.wa.us
- Hours of service:
8:00 AM - 4:30 PM (PST), Mon - Fri
- *Metadata standard name:
FGDC Content Standards for Digital Geospatial Metadata
- *Metadata standard version:
FGDC-STD-001-1998
- *Metadata time convention:
local time
- Metadata extensions:
-
- *Online linkage:
http://www.esri.com/metadata/esriprof80.html
- *Profile name:
ESRI Metadata Profile
Back to Top
|
